Week Commencing 15/03/2021 – In The News

Glass tubes containing different coloured chemicals.

Global Engineering Company Fined After Employees Exposed to Chemical Spill The fabrication division of Nasmyth Technologies Limited has been fined after four employees were exposed to hazardous substances that caused significant ill health and time off work as a result. On 9th October 2017, between 150 and 200 litres of a chemical preparation, that included […]

Week Commencing 08/03/2021 – In The News

The inside of a factory

International Women’s Day – 8th March On Monday 8th March, it was International Woman’s Day (IWD), a global day celebrating the social, economic, cultural and political achievements of women. The day also marks a call to action for accelerating gender parity. It has been celebrated since the early 1900s, a time of great change and […]

Week Commencing 01/03/2021 – In The News

Metal

Metal Supplier Fined After Employee Suffers Multiple Fractures A metal supplier has been fined after an employee suffered multiple fractures to the hand and wrist when he was polishing a metal bar with a manual metalworking lathe. On 27 January 2019, an employee working for Timet UK Limited was using a manual metalworking lathe to […]

Week Commencing 22/02/2021 – In The News

A medical worker wearing a face mask and protective eyewear..

Lockdown Roadmap Announced The Government has announced its roadmap for gradually easing lockdown restrictions in England. It has four main steps: In the first step of the prime minister’s roadmap, all pupils in England’s schools are expected to return to class from 8 March, with mass testing and wider use of face masks in secondary schools. […]

Safety Spotlight – Managing Health & Safety and Site Inductions

A floor plan on on a table with a tape measure, level, drill and screws.

For the month of February, we are putting in the spotlight two key areas relating to our Hazard of the Month, Near Misses. These key areas are Managing Health & Safety and Health and Safety Site Inductions. Managing Health & Safety Health and Safety needs to be managed in your workplace in order to create a […]

Week Commencing 15/02/2021 – In The News

Factories emitting large amounts of smoke.

Toxic Air Puts Six Million at Risk of Lung Damage About six million people aged over 65 in England are at high risk of lung damage and asthma attacks because of toxic air, according to a new report from the British Lung Foundation (BLF) and Asthma UK. It also found that: Older people and those […]

Week Commencing 01/02/2021 – In The News

Aerial photograph showing the extent of the damage to Cameron House after a fire that claimed the lives of two guests.

Luxury Hotel Fined £500,000 Over Fatal Hotel Fire A Scottish luxury hotel has been fined half a million pounds over a fire that claimed the lives of two guests. Cameron House has been ordered to pay £500,000 after admitting to breaches of fire safety rules. A hotel porter has also been given a community payback […]

Week Commencing 25/01/2021 – In The News

A worker driving a forklift with products on.

New Face Fit Testing Service WA Management is pleased to announce we are now offering face fit testing as part of our services. In order for respiratory protective equipment (RPE) to provide adequate protection for individual wearers, it cannot leak. A major cause of leaks is poor fit, therefore, tight-fitting facepieces need to fit the wearer’s face to […]

Week Commencing 18/01/2021 – In The News

The inside of a factory

Nestlé Fined After Worker Traps Arm in Machine Nestlé UK Ltd has been sentenced for breaching health and safety regulations after an employee was dragged into a machine on the production line of their Albion Mills site in Halifax. While observing the operation of the After Eight production machine, the technical operator placed his right […]

Week Commencing 11/01/2021 – In The News

An up-close view of parts of a metal machine.

Manufacturer Fined After Worker Severs Finger L.S. Starrett Company Limited, a precision tool manufacturer, has been fined after an employee’s index finger was severed and his thumb deeply lacerated in an incident involving a radial arm drilling machine. On 2nd October 2018, the hole saw operator was using a radial arm drilling machine when his […]